Detecting Redundant or Missing Isolation: Worked Example

Worked example

Worked Example for Detecting Redundant or Missing Isolation is anchored on Missing-isolation high-severity findings and redundant-cell area/timing overhead eliminated before low-power signoff freeze.. Convert observations into mechanism-backed and owner-bound actions.

A regression appears in Missing-isolation high-severity findings and redundant-cell area/timing overhead eliminated before low-power signoff freeze.. Strong closure isolates first failing boundary, proves mechanism, applies one reversible fix, and validates blast radius before release.

Execution lens

LOW-POWER VERIFICATION FLOW - Detecting Redundant or Missing Isolation

power intent and mode definitions
      |
      v
domain controls and transition sequencing
      |
      v
simulation behavior (isolation, retention, corruption)
      |
      v
assertions and coverage evidence
      |
      v
triage, bounded fix, and signoff closure

Decision matrix

EVIDENCE MATRIX - Detecting Redundant or Missing Isolation

+-----------------------------+--------------------------------+--------------------------------+---------------------------+
| Evidence                    | Tells you                      | Does not prove                 | Next action               |
+-----------------------------+--------------------------------+--------------------------------+---------------------------+
| transition timeline traces  | first failing LP phase         | complete root-cause ownership  | correlate with intent map |
| UPF-aware assertion logs    | contract violations by phase   | silicon product impact         | map to scenario severity  |
| corruption/X classification | actionable vs noisy failures   | legal transition completeness  | replay key mode corners   |
| save/restore snapshots      | state integrity movement       | isolation correctness          | pair with crossing checks |
| before-after regressions    | mitigation movement quality    | long-tail stability            | run full matrix           |
+-----------------------------+--------------------------------+--------------------------------+---------------------------+

Low-power verification deep dive

Boundary correctness depends on timing: isolate and shift at the right crossings and right phases.

Concept diagram

BOUNDARY SAFETY VIEW

domain crossing -> level-shift requirement -> isolation control -> OFF/ON transition behavior

Metric graph

BOUNDARY BUG CLASSES

missing isolation      █████
late isolation         ████
LS misdirection        ███

Metrics and artifacts to collect

• cross-domain boundary inventory

• clamp-value correctness report

• LS direction and threshold checks

• missing or redundant boundary action list

Mini case study

A boundary bug escaped unit tests until domain-off traffic stress revealed late isolation enable timing.

Debug branches

• Map each crossing to expected LS and isolation behavior.

• Verify enable timing against collapse and restore edges.

• Check clamp safety for protocol-facing signals.

Senior review question

Ask: what exact low-power transition boundary failed first, and which artifact proves the closure claim reproducibly?

Key takeaways

• Tie each LPV claim to a concrete transition boundary and one proving artifact.

• Prefer minimal reversible fixes with explicit owner and rollback criteria.

Common pitfalls

• Treating power-aware failures as random before boundary classification.

• Waiving X-prop failures before proving impact and root cause.

• Declaring closure without deterministic replay across key modes.

Worked-example reasoning

Start by proving phase and boundary assumptions before tuning checks.

Use one reversible change per hypothesis to preserve causality.