Regression Health Dashboard and Trend Governance: Step-by-Step Walkthrough

Step-by-step analysis walkthrough

Use when you own Regression Health Dashboard and Trend Governance in a VIP performance and reliability closure review.

Before starting

Freeze environment tags before collecting evidence. VIP traces without workload seed, firmware revision, timing profile, voltage/temperature state, and training snapshot are hard to compare and often create false root-cause conclusions.

This walkthrough intentionally moves from broad symptom to narrow mechanism. Jumping directly to knob tuning can improve one run while hiding the actual cause.

1. Capture baseline and failing traces with identical tags.

2. Mark first failing checker or scoreboard mismatch.

3. Inspect agent phasing, checker enables, and coverage holes.

4. Split hypotheses into stimulus, checker, reference-model, and DUT branches.

5. Implement smallest robust fix and verify rollback safety.

6. Run full compliance + regression matrix.

7. Publish closure memo with owners and watch metrics.

Artifacts to collect

• regression trend dashboard, flaky-test register, and build comparison report

• checker report

• coverage dashboard

• compliance traceability matrix

• release signoff checklist

Decision memo template

VIP DECISION MEMO - Regression Health Dashboard and Trend Governance
testcase:
observed metric:
root cause:
fix:
regression status:
owners: VIP architect, verification lead, protocol owner, compliance engineer, silicon validation owner

Reference tree

ROOT CAUSE TREE - Regression Health Dashboard and Trend Governance

regression stability index and flaky-test rate regressed
        |
reproducible with fixed seed?
      /               \
    no                 yes
    |                   |
testbench noise    localize bottleneck
                    /              \
               command path       data path
                 |                  |
             scheduler/FSM      PHY/timing/noise
                 |                  |
             timing limits      training/calibration

Stop at first failing mechanism, then patch and re-measure.

VIP deep dive

VIP release qualification, regression health, customer compliance evidence, and silicon correlation for production-ready IP.

Concept diagram

VIP SECTION - Signoff, Governance & Silicon Correlation

testcase -> agents -> checkers -> coverage -> evidence

Metric graph

checker noise vs real violations trend

Reports and artifacts

• checker hit report

• coverage closure sheet

• compliance trace matrix

• regression health snapshot

Mini case study

A profile drift caused false checker storms until configuration hashes were locked in CI.

Debug branches

• Reproduce with locked seed and profile

• Isolate checker vs scoreboard vs DUT paths

• Map failure to spec clause and owner

Senior review question

Ask: which latency, bandwidth, and reliability evidence proves this VIP topic is closed under real traffic?

Key takeaways

• Always tie controller and PHY counter shifts to application latency and throughput outcomes.

• Lock firmware timing profile, thermal condition, and DIMM state before comparing VIP captures.

Common pitfalls

• Chasing peak bandwidth while ignoring p99 latency and fairness tails.

• Changing timing guardbands without separating SI noise from scheduling issues.

• Declaring closure without reliability gates, fault injection, and regression replay.

VIP atlas notes

Regression Health Dashboard and Trend Governance should be read as an end-to-end VIP behavior, not as a single block definition. Production compliance closure reflects interactions between agents, checkers, coverage, and customer evidence before tapeout or IP release claims.

Dashboards track pass rates, runtime, checker noise, and coverage delta per build. Trend governance detects infra drift, seed instability, and emerging failure clusters before they invalidate compliance signoff. VIP inefficiency is multiplicative: one weak checker enable, one hollow coverage bin, or one non-reproducible failure repeated across regressions can dominate signoff risk.