Low Power / UPF · All levels

Isolation Debug: Worked Example

Worked Example for Isolation Debug.

Worked example

Worked Example for Isolation Debug focuses on time-to-root-cause for X leaks, isolation override bugs, and clamp polarity mismatches. The goal is to link observed behavior to power-intent mechanism, ownership, and release risk.

A nightly regression flags time-to-root-cause for X leaks, isolation override bugs, and clamp polarity mismatches. The correct approach is to freeze transition context, verify policy intent on the failing crossing, and then apply a minimal fix with full LP regression discipline.

Transition sequence under review

diagram

STATE TRANSITIONS — Isolation Debug

ON  --save-->  RETENTION  --off-->  OFF
 ^               |                    |
 |               +----restore<--------+
 +--------------------power_up--------+

Guard checks:
  - isolation asserted before OFF
  - restore before functional traffic
  - reset policy consistent with retained state

Isolation debug ladder

diagram

DEBUG LADDER

1) confirm failing crossing and destination domain
2) check iso policy bound to that crossing
3) check iso control polarity/timing (AON source)
4) check clamp value expectation vs protocol
5) replay with transition waveform

Capture failing waveform interval with power-state markers.
Tag domain states and policy controls at failure time.
Cross-check expected policy in UPF against observed behavior.
Compare against UPF debug transcript, waveform with power states, and boundary classification audit.
Choose one reversible fix and define regression blast radius before patching.

Did the fix hold?

diagram

BEFORE / AFTER FIX — Isolation Debug

metric quality
  ^
  |                       o target region
  |                 o post-fix + regression
  |            o
  |      o failing baseline
  +----------------------------------------> iteration
      sequence audit   policy fix   full re-run

Low-power deep dive

Isolation and retention are sequence-sensitive contracts, not static checkboxes.

Concept diagram

diagram

SEQUENCE

save -> isolate -> power-off -> power-on -> restore -> release

Metric graph

diagram

TRANSITION DEFECT MIX

polarity errors      ███████
late iso assertion   █████
restore ordering     ████

Reports and artifacts

isolation crossing report
retention list
save/restore timing
X-propagation log

Mini case study

A late isolation enable caused intermittent X leaks only on one PMU path.

Debug branches

Validate control polarity
Trace AON source
Replay transition waveform

Senior review question

Ask: what transition evidence proves this topic is closed, and which owner signs it?

Key takeaways

State transition context must accompany every low-power metric claim.
Intent changes require simulation, formal, and implementation re-validation.

Common pitfalls

Comparing results from mismatched UPF revisions.
Assuming static checks replace transition validation.
Shipping with aged waivers and unclear ownership.

Execution drill pack 1

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 1

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 2

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 2

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 3

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 3

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 4

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 4

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 5

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 5

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 6

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 6

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 7

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 7

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 8

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 8

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 9

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 9

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 10

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 10

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 11

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 11

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 12

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 12

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Execution drill pack 13

Use this pack to rehearse low-power closure on low-power/isolation-retention/isolation-debug/worked-example: transition framing, policy ownership, implementation evidence, and release confidence.

Transition checklist

State transition explicitly named with legal source/target states.
Crossing and domain ownership are mapped and agreed.
Policy controls are traced to always-on source logic.
Waveform bookmarks align controls with state timestamps.

Review prompts

Which policy object is first to deviate from intent?
Which owner can apply the smallest reversible fix?
What regression matrix proves no collateral damage?
Which waiver conditions would still block release?

Evidence capsule

diagram

LP EVIDENCE CAPSULE 13

PATH: low-power/isolation-retention/isolation-debug/worked-example
STATE WINDOW: <from -> to>
POLICY OBJECT: <isolation / retention / shifter / switch>
OWNER: <name>
PRIMARY ARTIFACT: <report/waveform/formal result>
RELEASE DECISION: <close / bounded waiver / escalate>

Principal LP review addendum

Isolation failures usually stem from polarity mistakes, late enable assertion, missing always-on routing, or incorrect domain boundary classification.

Metric: time-to-root-cause for X leaks, isolation override bugs, and clamp polarity mismatches

Practice this lesson