Skip to content
DenseChip
Learn
PracticeCode labInterview

DenseChip

Navigate

Menu

LearnPracticeCode labInterview

Tools

All toolsSV editorCode repoResume
DenseChip

Practice, courses, and chip-design tools in one focused workspace.

LearnPracticeCode labInterviewToolsLearning paths

© 2026 DenseChip

AboutContactPrivacyTerms
Skip to lesson

Course contents

  • How to Use This Course
  • Low-Power Metrics Reference
  • Low-Power Glossary
  • Reading Path
  • Power Intent Fundamentals61
    • Supply Sets & Power States
    • Power Domain Basics
      • Power Domain Basics: Mechanism
      • Power Domain Basics: Inputs & Outputs
      • Power Domain Basics: Reports & Metrics
      • Power Domain Basics: Debug Playbook
      • Power Domain Basics: Worked Example
      • Power Domain Basics: Pitfalls & Red Flags
      • Power Domain Basics: Interview Drills
      • Power Domain Basics: Review Checklist
      • Power Domain Basics: Theory Deep Dive
      • Power Domain Basics: Design Space
      • Power Domain Basics: Expanded Case Study
      • Power Domain Basics: Step-by-Step Walkthrough
      • Power Domain Basics: Comparison Matrix
      • Power Domain Basics: Software / Programmer View
      • Power Domain Basics: Silicon PPA Impact
    • UPF Object Model
    • CPF vs UPF
    • Power Intent Fundamentals: Tricky Q&A
  • Isolation & Retention61
  • Level Shifters & Power Switches61
  • UPF Implementation Flow61
  • Low Power Verification61
  • PD & Power Grid Integration61
  • Low Power Interview Prep4
  • Low Power / UPF Cheatsheet
Loading lesson

‹Power Domain Basics
  1. Topics
  2. Low-Power Design
  3. Power Intent Fundamentals
  4. Power Domain Basics
  5. Power Domain Basics: Step-by-Step Walkthrough

Low Power / UPF · All levels

Power Domain Basics: Step-by-Step Walkthrough

Step-by-Step Walkthrough for Power Domain Basics.

On this page

    Step-by-step analysis walkthrough

    Use when you own Power Domain Basics in a low-power closure war room.

    1. Open failing LP test and capture transition window.

    2. Map source/destination domains and state at failure point.

    3. Check isolation/retention/level-shifter policies on that crossing.

    4. Verify PMU ordering against spec.

    5. Check implementation reports for physical legality.

    6. Run root-cause branch: intent vs sequence vs physical.

    7. Patch minimal owner-controlled change.

    8. Run focused test then full LP matrix.

    9. Update signoff dashboard and closure note.

    Artifacts to collect

    • domain map, UPF create_power_domain rules, and crossing inventory

    • UPF revision

    • PMU sequence trace

    • state coverage report

    • waiver ledger

    Decision memo template

    Diagram
    LOW-POWER DECISION MEMO — Power Domain Basics
    state transition:
    observed metric:
    root cause:
    fix:
    regression:
    owners: architecture owner, RTL owner, UPF owner

    Reference visuals

    Domain partitioning with crossings

    Diagram
    DOMAIN PARTITION
    
    always_on_ctrl ---> [ISO] ---> cpu_domain (switchable)
    always_on_ctrl ---> [ISO] ---> video_domain (switchable)
    cpu_domain -----> [LS]  -----> video_domain
    
    Every crossing needs isolation/level-shift policy ownership.

    Low-power deep dive

    Power intent must be explicit, reviewable, and tool-consistent from day one.

    Concept diagram

    Diagram
    POWER INTENT FLOW
    
    architecture -> UPF objects -> tool binding -> verification evidence

    Metric graph

    Diagram
    INTENT QUALITY
    
    bound policies      ████████████ high
    stale references    ███          medium risk
    missing states      ██           high risk

    Reports and artifacts

    • PST report

    • domain map

    • UPF lint

    • policy binding summary

    Mini case study

    One missing PST entry blocked legal retention mode and caused false debug loops.

    Debug branches

    • Check legal state table first

    • Audit policy binding IDs

    • Freeze UPF revision tags

    Senior review question

    Ask: what transition evidence proves this topic is closed, and which owner signs it?

    Key takeaways

    • State transition context must accompany every low-power metric claim.

    • Intent changes require simulation, formal, and implementation re-validation.

    Common pitfalls

    • Comparing results from mismatched UPF revisions.

    • Assuming static checks replace transition validation.

    • Shipping with aged waivers and unclear ownership.

    Execution drill pack 1

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 1
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 2

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 2
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 3

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 3
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 4

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 4
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 5

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 5
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 6

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 6
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 7

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 7
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 8

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 8
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 9

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 9
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 10

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 10
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 11

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 11
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 12

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 12
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Execution drill pack 13

    Use this pack to rehearse low-power closure on low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough: transition framing, policy ownership, implementation evidence, and release confidence.

    Transition checklist

    • State transition explicitly named with legal source/target states.

    • Crossing and domain ownership are mapped and agreed.

    • Policy controls are traced to always-on source logic.

    • Waveform bookmarks align controls with state timestamps.

    Review prompts

    1. Which policy object is first to deviate from intent?

    2. Which owner can apply the smallest reversible fix?

    3. What regression matrix proves no collateral damage?

    4. Which waiver conditions would still block release?

    Evidence capsule

    Diagram
    LP EVIDENCE CAPSULE 13
    
    PATH: low-power/power-intent-fundamentals/power-domain-basics/step-by-step-walkthrough
    STATE WINDOW: <from -> to>
    POLICY OBJECT: <isolation / retention / shifter / switch>
    OWNER: <name>
    PRIMARY ARTIFACT: <report/waveform/formal result>
    RELEASE DECISION: <close / bounded waiver / escalate>

    Principal LP review addendum

    Power domains partition logic by shutdown policy and voltage operation so isolation, retention, and level-shifter rules can be applied deterministically.

    Metric: domain assignment completeness, cross-domain crossing count, and always-on reachability

    This content block can't be displayed here.

    Block type: unknown

    This content block can't be displayed here.

    Block type: unknown

    This content block can't be displayed here.

    Block type: unknown

    Previous

    31 / 375

    Next: Power Domain Basics: Comparison Matrix

    Up next

    Up nextPower Domain Basics: Comparison Matrix

    Sign in to save progress

    Practice this lessonReport an error

    See also

    • Power Domain Basics: Mechanism
    • Power Domain Basics: Inputs & Outputs
    • Power Domain Basics: Reports & Metrics