Review Checklist for Reset-Domain Integration Debug focuses on reset-domain escape count, debug turnaround for boot hangs. The goal is to map symptoms to boundary contracts, owner actions, and regression-proof closure.
Baseline manifest and revision are explicit.
Boundary contracts for this topic are current and approved.
Ownership map covers all open issues.
Focused and full regression evidence both exist.
Residual risks are either closed or bounded via waiver policy.
Owners signed: bring-up lead, integration lead, firmware owner.
OWNERSHIP MAP — Reset-Domain Integration Debug
artifact owner
----------------- -----------------
primary owner bring-up lead
co-owner integration lead
review owner firmware owner
No top-level issue should remain ownerless beyond one review cycle.Clock/reset assumptions must be globally consistent across functional and test modes.
CLOCK/RESET FLOW
pll lock -> clock enable -> reset release -> domain readyBOOT STABILITY
stable boots ████████
reset hangs ███clock architecture report
reset release timing
mode matrix
boot trace summary
Intermittent boot hang traced to one domain releasing reset before dependent clock was stable.
Check mode-specific constraints
Trace reset dependencies
Correlate firmware sequencing
Ask: what baseline, owner, and artifact prove this topic is truly closed?
State baseline manifest and owner with every closure metric.
Run cross-domain regression after every top-level fix.
Comparing results across different manifests.
Unowned issues slipping through review cycles.
Waiving risks without expiry and validation plan.
Reset-domain debug traces dependency chains between PLL lock, power-good, reset deassertion, and software initialization ordering.
Metric: reset-domain escape count, debug turnaround for boot hangs
This content block can't be displayed here.
Block type: unknown
This content block can't be displayed here.
Block type: unknown
This content block can't be displayed here.
Block type: unknown