Inputs and outputs contract

Inputs & Outputs for Lock & Reset Behavior focuses on false-lock events, reset release escapes, bring-up retries. The goal is to connect observed symptom to boundary mechanism, ownership, and signoff risk.

Treat these inputs and outputs as signed interface guarantees. Ambiguity here creates the most expensive integration bugs.

INPUTS
  - AMS handoff contract and spec revision
  - mode definitions (power/clock/reset/traffic)
  - wrapper and boundary-cell assumptions
  - physical constraints: keepouts, guard, package limits

OUTPUTS
  - mode-tagged metric report
  - owner-signed debug or closure note
  - waiver manifest with expiry and controls
  - release recommendation

Boundary sequence

AMS BOUNDARY SEQUENCE — Lock & Reset Behavior

analog macro -> wrapper / boundary cell -> synchronizer or sampler -> digital consumer
      |                 |                         |                     |
  analog assumptions    legal voltage/state       clock/reset contract   protocol/data validity

metric under watch: false-lock events, reset release escapes, bring-up retries

Ownership map

OWNERSHIP MAP — Lock & Reset Behavior

artifact                  owner
----------------------    -----------------------------
integration artifact    reset architect
implementation artifact firmware owner
signoff artifact        validation owner

Every boundary issue needs a named owner before fixes start.

AMS deep dive

Clock quality evidence must include jitter and sequencing, not lock status alone.

Concept diagram

CLOCKING FLOW

reference -> PLL/DLL -> distribution -> endpoint margin

Metric graph

JITTER TREND

jitter ps
  ^
  |   o baseline
  |      o stress mode
  |         o failure edge

Reports and artifacts

• jitter budget

• lock/unlock counters

• phase-noise snapshot

• STA uncertainty deltas

Mini case study

False-lock condition released reset early; endpoint logic sampled unstable clock edge patterns.

Debug branches

• Lock qualification policy

• Reset sequencing check

• Package/supply contributors

Senior review question

Ask: what boundary condition proves this topic is actually closed?

Key takeaways

• State boundary, mode, and evidence tag with every claim.

• Always align analog, digital, and physical owners before signoff decisions.

Common pitfalls

• Fixing averages while tails still fail.

• Skipping package/supply evidence in jitter or SerDes issues.

• Shipping with waivers that lack owner and expiration criteria.

Principal AMS review addendum

Digital reset sequencing and lock qualification must guard against metastable or premature clock usage while PLL/DLL loops settle after power events.

Metric: false-lock events, reset release escapes, bring-up retries