Lock & Reset Behavior: Step-by-Step Walkthrough

Step-by-step analysis walkthrough

Use this when you own Lock & Reset Behavior during an AMS war room.

1. Capture failing mode and environmental condition.

2. Pull synchronized waveform, logs, and report artifacts.

3. Mark first boundary where legal behavior diverges.

4. Audit reset/clock/power sequence assumptions.

5. Check physical coupling contributors (floorplan/power/package) where relevant.

6. Assign single-thread ownership for the first fix.

7. Propose bounded change and define success criterion.

8. Run scenario and safety regressions.

9. Document findings in closure memo.

10. Update signoff dashboard and waiver state.

Artifacts to collect

• bring-up state chart, reset dependency table, lock qualification log

• handoff contract

• firmware/config tag

• physical signoff snapshot

• decision memo

Decision memo template

AMS DECISION MEMO — Lock & Reset Behavior
mode/condition:
metric:
hypothesis:
fix:
regression:
owners: reset architect, firmware owner, validation owner

Reference visuals

Reset and lock sequencing

power-good -> analog bias settle -> lock qualified -> digital reset release
                                        |
                                 guard against false lock

AMS deep dive

Clock quality evidence must include jitter and sequencing, not lock status alone.

Concept diagram

CLOCKING FLOW

reference -> PLL/DLL -> distribution -> endpoint margin

Metric graph

JITTER TREND

jitter ps
  ^
  |   o baseline
  |      o stress mode
  |         o failure edge

Reports and artifacts

• jitter budget

• lock/unlock counters

• phase-noise snapshot

• STA uncertainty deltas

Mini case study

False-lock condition released reset early; endpoint logic sampled unstable clock edge patterns.

Debug branches

• Lock qualification policy

• Reset sequencing check

• Package/supply contributors

Senior review question

Ask: what boundary condition proves this topic is actually closed?

Key takeaways

• State boundary, mode, and evidence tag with every claim.

• Always align analog, digital, and physical owners before signoff decisions.

Common pitfalls

• Fixing averages while tails still fail.

• Skipping package/supply evidence in jitter or SerDes issues.

• Shipping with waivers that lack owner and expiration criteria.

Principal AMS review addendum

Digital reset sequencing and lock qualification must guard against metastable or premature clock usage while PLL/DLL loops settle after power events.

Metric: false-lock events, reset release escapes, bring-up retries