Path Group Prioritization: Mechanism

Mechanism to understand

Mechanism for Path Group Prioritization focuses on WNS by path group, reg2reg vs in2reg vs reg2out slack. The goal is to connect the observable symptom to timing mechanism, ownership, and regression risk.

Path groups classify timing intent so optimization and debug focus on the paths that matter for signoff and product modes. Think of STA as a signed contract between constraints, parasitics, and implementation — slack is the measurable outcome.

• Identify launch and capture clocks on the failing path.

• Identify path group: reg2reg, in2reg, reg2out, or async.

• Identify whether setup, hold, or both fail in the scenario.

Layered view

STA CLOSURE FLOW — Path Group Prioritization

constraints (SDC)
        |
        v
timing graph (cell + net delays)
        |
        v
MMMC scenarios (corner x mode x view)
        |
        v
variation + SI adjustments
        |
        v
slack (WNS/TNS) -> ECO -> regression

Debug rule: always state corner, mode, view, and database tag with slack.

Path group map

PATH GROUPS

reg2reg   : FF -> logic -> FF     (core closure)
in2reg    : input -> FF           (interface)
reg2out   : FF -> output          (interface)
reg2cg    : FF -> clock gate      (special hold risk)

Optimize and report WNS per group — not global average only.

Layer responsibilities

STA OWNERSHIP LAYERS — Path Group Prioritization

layer              owns                         failure mode
----------------   --------------------------   ---------------------
constraints        clocks, IO, exceptions       false violations
implementation     cells, nets, placement       real path delay
extraction         SPEF/RC corners              view mismatch
signoff policy     derate, MMMC matrix          margin disputes
closure           ECO order, regression        fix breaks other corner

STA deep dive

Slack is a path story — read the graph, not just the number.

Concept diagram

TIMING GRAPH

FF --cell-- logic --net-- logic --cell-- FF
launch                              capture

Metric graph

SLACK TAIL

paths |    ***
      |  *******
      |*********  <- fix WNS first

Reports and artifacts

• WNS/TNS

• path slack histogram

• cell vs net %

• path group summary

Mini case study

WNS -90ps but 80% net delay on one congested route — PD route fix beat upsizing three cells.

Debug branches

• Cell-heavy -> sizing/VT

• Net-heavy -> route/layer

• Check launch/capture clocks

Senior review question

Ask: what corner/mode/view proves this topic is closed or failing?

Key takeaways

• State corner, mode, view, and database tag with every slack claim.

• Run setup and hold plus MMMC regression after every ECO.

Common pitfalls

• Comparing STA runs with different SPEF or SDC tags.

• Broad false_path to green-wash violations.

• Setup-only ECO without hold check.

Mechanism deep dive

Path groups classify timing intent so optimization and debug focus on the paths that matter for signoff and product modes.