I/O Timing & Boundary Contracts: Inputs & Outputs

Inputs and outputs contract

Inputs & Outputs for I/O Timing & Boundary Contracts focuses on interface setup/hold WNS, input/output delay coverage, port slack. The goal is to connect the observable symptom to timing mechanism, ownership, and regression risk.

Treat these as a signed interface contract. Ambiguity here is the single biggest source of wasted integration weeks, because two teams debug against different assumptions.

INPUTS
  - SDC (clocks, IO delays, exceptions)
  - Liberty libraries per corner
  - SPEF/parasitics and RC corner
  - MMMC scenario definition

OUTPUTS
  - WNS/TNS reports per scenario
  - path group summaries
  - constraint audit / waiver log
  - signoff closure memo

Timing path sequence

TIMING PATH — I/O Timing & Boundary Contracts

launch FF --logic stages--> capture FF
     |                           |
  launch clock                capture clock
     |                           |
  required: arrival < capture_edge - setup
  metric: interface setup/hold WNS, input/output delay coverage, port slack

Ownership map

OWNERSHIP MAP — I/O Timing & Boundary Contracts

artifact              owner
----------------      -----------------
timing report       STA owner
SDC/constraint      package owner
implementation      system integration owner

Every WNS cluster needs a named owner before ECO.

STA deep dive

SDC quality determines whether STA measures reality or fiction.

Concept diagram

SDC FLOW

RTL clocks -> create_clock / generated_clock
board      -> set_input/output_delay
exceptions -> false_path / multicycle (audited)
analysis   -> report_timing

Metric graph

CONSTRAINT QUALITY

audited exceptions  ████████████████  good
stale IO delays     ██████            risk
missing gen clock   ████              high escape

Reports and artifacts

• clock report

• uncertainty budget

• IO delay coverage

• exception audit log

Mini case study

1000 new failing paths overnight: SDC merge dropped a generated_clock on divider output. No PD change needed.

Debug branches

• Diff SDC before ECO

• Validate clocks on failing path

• Audit false paths quarterly

Senior review question

Ask: what corner/mode/view proves this topic is closed or failing?

Key takeaways

• State corner, mode, view, and database tag with every slack claim.

• Run setup and hold plus MMMC regression after every ECO.

Common pitfalls

• Comparing STA runs with different SPEF or SDC tags.

• Broad false_path to green-wash violations.

• Setup-only ECO without hold check.

Principal STA review addendum

set_input_delay and set_output_delay translate board and pad timing into the block boundary so internal STA matches system timing.

Metric: interface setup/hold WNS, input/output delay coverage, port slack