Review checklist

Review Checklist for Layering & Transaction Model focuses on transaction latency, payload efficiency, retry rate. The goal is to connect the observable symptom to protocol mechanism, ownership, and regression risk.

• Spec revision and implemented feature subset are named.

• Clock/reset and CDC assumptions are reviewed.

• Traffic classes, IDs/tags, ordering, and outstanding limits are documented.

• VIP/compliance coverage maps back to requirements.

• Performance metric and debug artifact are stored with the signoff note.

• Owners signed: protocol architect, RTL owner, VIP owner.

Sign-off ownership

OWNERSHIP MAP — Layering & Transaction Model

evidence type        owner who reads it
-----------------    ---------------------------
waveform/RTL        protocol architect
spec/VIP            RTL owner
firmware/system     VIP owner

Rule: every metric must have a named owner before a review starts.

Protocol deep dive

Before naming AXI or PCIe, engineers must master layering, handshakes, ordering, and bandwidth math. These four ideas explain 80% of integration bugs.

Concept diagram

FUNDAMENTALS STACK

software intent
     |
transaction (ID, addr, len, attr, order)
     |
link/channel (handshake, credit, retry)
     |
physical (clock, reset, lanes, PHY)

Debug golden rule: never change layers without carrying transaction identity.

Metric graph

STALL BREAKDOWN EXAMPLE

ready stalls      ████████████████  42%
credit wait       ██████████        26%
ordering block    ██████            16%
reset/config      ████              10%
other             ██                6%

If ready stalls dominate, widening the bus will not help.

Metrics and artifacts to collect

• transaction latency by class

• ready stall cycles

• outstanding depth utilization

• payload efficiency vs headline width

• retry and error rate

Mini case study

A team widened a 64-bit interface to 128-bit but throughput rose only 8% because ready stalls from a slow slave dominated. Fixing slave acceptance and FIFO depth moved the metric; width did not.

Debug branches

• If latency spikes but bandwidth flat, check outstanding limits and ordering.

• If throughput collapses at high load, draw the knee curve — you are past queue stability.

• If intermittent, compare reset release order and clock domain boundaries.

Senior review question

Ask: what is the first transaction that deviates, and which spec rule does it test?

Key takeaways

• Connect every protocol claim to a transaction identity and measurable metric.

• Store the artifact (waveform, log, counter) next to every signoff decision.

Common pitfalls

• Debugging timeouts without finding the first bad transaction.

• Quoting peak bus width without payload efficiency and retry overhead.

• Treating VIP compliance as a substitute for system integration replay.

Principal review addendum

Re-read Layering & Transaction Model against one concrete product workload, not a synthetic directed test.

PHY/link/transaction layering separates electrical transfer from ordering and software-visible semantics.