AXI Channels & Transfers: Review Checklist

Review checklist

Review Checklist for AXI Channels & Transfers focuses on read/write throughput, outstanding transaction depth, response error rate. The goal is to connect the observable symptom to protocol mechanism, ownership, and regression risk.

• Spec revision and implemented feature subset are named.

• Clock/reset and CDC assumptions are reviewed.

• Traffic classes, IDs/tags, ordering, and outstanding limits are documented.

• VIP/compliance coverage maps back to requirements.

• Performance metric and debug artifact are stored with the signoff note.

• Owners signed: AXI RTL owner, VIP owner, fabric owner.

Sign-off ownership

OWNERSHIP MAP — AXI Channels & Transfers

evidence type        owner who reads it
-----------------    ---------------------------
waveform/RTL        AXI RTL owner
spec/VIP            VIP owner
firmware/system     fabric owner

Rule: every metric must have a named owner before a review starts.

Protocol deep dive

AMBA is the on-chip lingua franca: APB for control, AHB for legacy bursts, AXI for high-performance coherent fabrics.

Concept diagram

AMBA INTEGRATION MAP

CPU --AXI--> NIC --AXI--> SRAM
  |              |
  +--AXI-Lite--> peripherals (GPIO, timers)
  +--AXI-Stream-> video pipe

Every bridge is a contract rewrite: width, ID, burst, cache attrs.

Metric graph

AXI CHANNEL ACTIVITY (mixed traffic)

AW+W     ████████████
AR       ████████████████
R        ██████████████
B        ████████

Read-heavy phase: AR/R dominate; write resp may look idle while system is healthy.

Metrics and artifacts to collect

• AR/AW/R/B channel utilization

• write resp latency

• read OSTD depth

• SLVERR/DECERR count

• bridge hang log

Mini case study

Write burst hung because W beats arrived before AW for a narrow bridge that reordered channels. VIP flagged nothing until full-system traffic interleaved reads and writes.

Debug branches

• Hung write: verify AW/W ordering and wlast alignment.

• Hung read: check arready stall and rlast per ID.

• Decode errors: address map vs interconnect route table.

Senior review question

Ask: what is the first transaction that deviates, and which spec rule does it test?

Key takeaways

• Connect every protocol claim to a transaction identity and measurable metric.

• Store the artifact (waveform, log, counter) next to every signoff decision.

Common pitfalls

• Debugging timeouts without finding the first bad transaction.

• Quoting peak bus width without payload efficiency and retry overhead.

• Treating VIP compliance as a substitute for system integration replay.

Principal review addendum

Re-read AXI Channels & Transfers against one concrete product workload, not a synthetic directed test.

AXI splits address, data, and response channels so reads and writes can progress independently.