Inputs and outputs contract

Inputs & Outputs for PCIe / CXL Debug focuses on link degrade event count, completion timeout rate, poison/error log. The goal is to connect the observable symptom to protocol mechanism, ownership, and regression risk.

Treat these as a signed interface contract. Ambiguity here is the single biggest source of wasted integration weeks, because two teams debug against different assumptions.

INPUTS
  - protocol spec revision and feature subset
  - clock/reset assumptions
  - address map, ID/tag width, ordering attributes
  - traffic class, QoS, firmware register settings

OUTPUTS
  - legal transaction trace
  - integration waiver list
  - VIP/compliance report
  - owner-signed debug or signoff note

Transaction sequence

SEQUENCE — PCIe / CXL Debug

  initiator            interconnect/PHY            target
      |  request (id) ------->  |                     |
      |                         |  forward ----------> |
      |                         |                     | work
      |                         |  <---- response ---- |
      |  <----- complete ------ |                     |
      |
   metric captured here: link degrade event count, completion timeout rate, poison/error log

Ownership map

OWNERSHIP MAP — PCIe / CXL Debug

evidence type        owner who reads it
-----------------    ---------------------------
waveform/RTL        debug lead
spec/VIP            firmware owner
firmware/system     controller owner

Rule: every metric must have a named owner before a review starts.

Protocol deep dive

PCIe is reliable packet delivery over unreliable links; debug flows PHY -> DLL -> TLP -> firmware.

Concept diagram

PCIe DEBUG TOP-DOWN

L0 link healthy?  -> credits OK?  -> TLP completes?  -> driver happy?

Skip a layer and you will mis-own the bug.

Metric graph

LINK DEGRADE EXAMPLE

target x4 Gen4  ---- ---- ---- ----
actual   x4 Gen4  ---- ---- ---- ----   (eval board)
actual   x1 Gen3  -                   (product board)

Package/SI often shows up as width downgrade, not hard fail.

Metrics and artifacts to collect

• link width/speed

• replay count

• completion timeout

• AER error log

• LTSSM history

Mini case study

Endpoint enumerated but DMA timed out: completion credits exhausted because a switch port was misconfigured in firmware, not because the endpoint was broken.

Debug branches

• If degrade at width/speed, PHY/SI before driver.

• If replay storm, link layer before transaction layer.

• If CXL coherency bug, separate .io vs .cache vs .mem traffic.

Senior review question

Ask: what is the first transaction that deviates, and which spec rule does it test?

Key takeaways

• Connect every protocol claim to a transaction identity and measurable metric.

• Store the artifact (waveform, log, counter) next to every signoff decision.

Common pitfalls

• Debugging timeouts without finding the first bad transaction.

• Quoting peak bus width without payload efficiency and retry overhead.

• Treating VIP compliance as a substitute for system integration replay.

Principal review addendum

Re-read PCIe / CXL Debug against one concrete product workload, not a synthetic directed test.

debug starts at link health, then checks packet credit, ordering, firmware resource allocation, and endpoint behavior.