Pitfalls and red flags

Pitfalls & Red Flags for Shift vs Capture Timing focuses on shift hold violations, capture setup failures, at-speed pattern pass rate. The goal is to convert metric movement into mechanism, owner, and release decision.

• Coverage improves while diagnosis quality degrades.

• Pattern count drops but test escapes rise.

• Shift timing passes while capture timing regresses.

• Power fixes alter quality behavior without retest.

• Owner handoff is unclear for recurring failures.

Layer responsibility check

DFT OWNERSHIP LAYERS - Shift vs Capture Timing

layer              owns                         failure mode
----------------   --------------------------   -------------------------
rtl/architecture   scanability hooks            uncontrollable logic
atpg/constraints   legal pattern intent         aborts, low coverage
physical/clocking  chain route + test clocks    shift hold/timing escapes
tester/program     pattern apply integrity      false binning / bad fails
quality signoff    release criteria             escapes or schedule slip

DFT deep dive

Test signoff fails when shift/capture timing and test power are treated independently.

Concept diagram

TEST SIGNOFF LOOP

test SDC -> shift/capture timing -> power-aware ATPG -> IR validation -> release

Metric graph

TEST CURRENT

functional current  baseline
scan shift current  peak-risk zone

Reports and artifacts

• test-mode STA report

• shift/capture split

• test power IR map

• waiver tracker

Mini case study

At-speed patterns passed timing but failed in production due to peak shift IR; staggered capture and power-aware fill resolved.

Debug branches

• Tag test and functional corners separately

• Check hold in shift mode

• Correlate fail bins with power hotspots

Senior review question

Ask: what evidence proves this DFT decision is safe for production?

Key takeaways

• State metric, lot/corner context, and pattern tag with every claim.

• Treat timing, power, and quality as one signoff problem.

Common pitfalls

• Chasing coverage without legality checks.

• Ignoring test-power side effects of pattern changes.

• Debugging silicon without reproducible tags.

Principal DFT review addendum

Shift mode is hold-sensitive while capture mode is setup-sensitive; closure must preserve both under test clocking assumptions.

Metric: shift hold violations, capture setup failures, at-speed pattern pass rate