Review checklist

Review Checklist for Training & Timing Modes focuses on training margin, eye width, boot failure rate. The goal is to connect the observable symptom to protocol mechanism, ownership, and regression risk.

• Spec revision and implemented feature subset are named.

• Clock/reset and CDC assumptions are reviewed.

• Traffic classes, IDs/tags, ordering, and outstanding limits are documented.

• VIP/compliance coverage maps back to requirements.

• Performance metric and debug artifact are stored with the signoff note.

• Owners signed: bring-up owner, PHY owner, board owner.

Sign-off ownership

OWNERSHIP MAP — Training & Timing Modes

evidence type        owner who reads it
-----------------    ---------------------------
waveform/RTL        bring-up owner
spec/VIP            PHY owner
firmware/system     board owner

Rule: every metric must have a named owner before a review starts.

Protocol deep dive

DDR bandwidth is scheduler + PHY: rows, banks, refresh, and turnarounds eat headline data rate.

Concept diagram

MEMORY PATH

masters -> controller scheduler -> PHY -> DRAM banks
              |                      |
         refresh/QoS            training/margin

Scheduler sees transactions; PHY sees picoseconds.

Metric graph

BANDWIDTH LOSS WATERFALL

peak              ████████████████████████
refresh           █████████████████████
turnaround        ██████████████████
row miss          ██████████████
effective         ██████████████

Quote the bottom bar in reviews.

Metrics and artifacts to collect

• effective BW

• row hit rate

• refresh stall %

• training margin

• ECC error log

Mini case study

Video workload lost half effective bandwidth after firmware enabled aggressive low-power refresh. Scheduler and firmware QoS had to be co-designed.

Debug branches

• If ECC errors, check training margin and address interleave first.

• If BW low with high row hit, suspect port arbitration not DRAM.

• If boot fail, stop at training step in transcript.

Senior review question

Ask: what is the first transaction that deviates, and which spec rule does it test?

Key takeaways

• Connect every protocol claim to a transaction identity and measurable metric.

• Store the artifact (waveform, log, counter) next to every signoff decision.

Common pitfalls

• Debugging timeouts without finding the first bad transaction.

• Quoting peak bus width without payload efficiency and retry overhead.

• Treating VIP compliance as a substitute for system integration replay.

Principal review addendum

Re-read Training & Timing Modes against one concrete product workload, not a synthetic directed test.

training aligns DQS/DQ timing and voltage margins so digital transfers survive PVT and board/package variation.